MAX213CDB
| Parameters | |
|---|---|
| Out Swing-Min | 2 V |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX213 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Voltage | 9V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Output Current | 10mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 5 |
MAX213CDB Overview
This driver chip is excellent for driving common LEDs due to its enhanced 28-SSOP (0.209, 5.30mm Width) package.The receiver is packaged in a Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply for this differential driver is 4.5V~5.5V.At any given time, there can be up to 4/5 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.Wide receiver has 28 terminations built in for driving or receiving signals from data.Transceiver comes with 28 standard pinouts that meet the market's requirements.MAX213 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 28-pin driver IC.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.The module isolated transceivers are 5 receivers.The integrator circuit has embedded 4 drivers.There is a capabilWide receivery to deliver voltage at 9V wWide receiverh this device.As a result of this bluetooth transceiver, its output current is 10mA.
MAX213CDB Features
Tube package
28 pin count
28 pins
5V power supply
MAX213CDB Applications
There are a lot of Texas Instruments MAX213CDB Drivers/Receivers/Transceivers applications.
- Data center
- Switches
- Wireless communication
- Ship
- Pocket PC
- Radio transmission
- Wireless interactive experience
- Thermal management
- Remote controls
- Wireless showroom
