Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SSOP (0.209, 5.30mm Width) |
Number of Pins |
28 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1997 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Additional Feature |
2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
Subcategory |
Line Driver or Receivers |
Max Power Dissipation |
762mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX213 |
Pin Count |
28 |
Output Voltage |
9V |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Interface |
RS-232 |
Number of I/O |
18 |
Nominal Supply Current |
20mA |
Propagation Delay |
40 μs |
Logic Function |
Receiver, Transceiver |
Data Rate |
120Kbps |
Output Characteristics |
3-STATE |
Differential Output |
NO |
Output Polarity |
INVERTED |
Protocol |
RS232 |
Input Characteristics |
SCHMITT TRIGGER |
Number of Drivers/Receivers |
4/5 |
Duplex |
Full |
Receiver Hysteresis |
500mV |
Number of Drivers |
4 |
Number of Transceivers |
1 |
Number of Receivers |
5 |
Height |
1.78mm |
Length |
10.33mm |
Width |
5.38mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX213ECAI Overview
The enhanced 28-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.This receiver is mounted in the Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.Up to 4/5 receivers/drivers can be installed simultaneously on this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number MAX213 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation driver IC with 28 pins.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There is a voltage input supply of 5V required for the operation of this integrated circuit.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.There are 1 transceivers in total implemented by this IC.Additionally, there are 5 receivers included in the package.On the part, 4 drivers are embedded in order to facilitate the operation of the device.Additionally, this optical transceiver module features the 2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function, which improves the stability and accuracy of signal management in general.In this instance, there are a total of 18 serial input/output ports on the IC.Wide receiver provides the output voltage of 9V.
MAX213ECAI Features
Tube package
28 pin count
28 pins
5V power supply
MAX213ECAI Applications
There are a lot of Maxim Integrated MAX213ECAI Drivers/Receivers/Transceivers applications.
- Wireless communication
- LAN, SAN, WAN (local, storage, work area networks)
- Car alarm systems
- AV receiver
- Satellite radio receiver
- Wireless access points
- Satellite communication
- Changeing the frequency from IF to RF
- Structural bonding
- Automation systems