MAX213EEAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX213 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 18 |
| Nominal Supply Current | 20mA |
| Propagation Delay | 40 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 5 |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX213EEAI+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 28-SSOP (0.209, 5.30mm Width) package.Tube package is used for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.With respect to the power supply, this differential driver uses 4.5V~5.5V.As many as 4/5 receivers/drivers are eligible for use on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.28 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX213 describes the product type, temperature, package, etc., you might get more options by searching with it.This is a 28-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.There are two types of input voltage supply available for this IC, 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.The module isolated transceiver implements a total of 1 transceivers.In addition to that, it contains 5 receivers as well.4 drivers are embedded on the integrator circuit.This is an IC with 18 standard serial I/O capabilities.
MAX213EEAI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX213EEAI+ Applications
There are a lot of Maxim Integrated MAX213EEAI+ Drivers/Receivers/Transceivers applications.
- IP cameras
- Remote controls
- Long-distance fiber optic network applications
- Shortwave receiver
- Wireless projection application for conferences
- AV receiver
- Routers
- Fiber optic cable connection network
- 1x/2x Fiber Channel
- Single fiber bidirectional application
