MAX213IDB
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX213 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Voltage | 9V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Output Current | 10mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 5 |
| Out Swing-Min | 2 V |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
MAX213IDB Overview
Designed for common LEDs, this driver IC features an enhanced 28-SSOP (0.209, 5.30mm Width) package.The Tube package contains this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.It is possible to have up to 4/5 receivers/drivers in use simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.The transceiver is packaged with 28 market standard pinouts so that it can be easily used.Since the base part number MAX213 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.28-pin driver chip with enhanced power dissipation.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.ICs implement a total of 1 transceivers.This rf transceiver module can have?up to 5 eligible receivers on the field at once.?4 drivers are embedded on the integrator circuit.At 9V, Wide receiver is able to deliver voltage to the load.With this bluetooth transceiver, you are able to obtain a current of 10mA at the output.
MAX213IDB Features
Tube package
28 pin count
28 pins
5V power supply
MAX213IDB Applications
There are a lot of Texas Instruments MAX213IDB Drivers/Receivers/Transceivers applications.
- Bridges
- IPTV front end
- IP cameras
- 1x/2x Fiber Channel
- Metro access rings
- Military satellite communications
- Fiber-to-the-desktop
- Wireless security systems
- Wireless transmission
- Wireless showroom
