MAX220CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX220 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 2mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 3000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX220CWE+ Overview
Due to the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver consumes 4.5V~5.5V for its power supplyThe field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.For more variants of this part, try searching with the base part number MAX220, which indicates the product type, temperature, package, etc.This ic receiver provided a 2-bit resolution capability. This receiver is typically specified with a resolution of 2 bits. A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.To power the ic receiver, sufficient current but not more than 2mA should be supplied to its VCC pin.
MAX220CWE+ Features
Tube package
16 pin count
5V power supply
MAX220CWE+ Applications
There are a lot of Maxim Integrated MAX220CWE+ Drivers/Receivers/Transceivers applications.
- Televisions
- Servers
- Automation systems
- interconnection between computers
- Single to Multimode Fiber Conversion
- Fiber-to-the-desktop
- Wireless communication
- Car radio
- Copper connection network
- Radio transmission
