Parameters |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX220 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of I/O |
8 |
Nominal Supply Current |
2mA |
Propagation Delay |
3 μs |
Logic Function |
Receiver, Transceiver |
Data Rate |
120Kbps |
Output Characteristics |
TOTEM-POLE |
Differential Output |
NO |
Output Polarity |
INVERTED |
Protocol |
RS232 |
Input Characteristics |
SCHMITT TRIGGER |
Number of Drivers/Receivers |
2/2 |
Receiver Number of Bits |
2 |
Duplex |
Full |
Receiver Hysteresis |
500mV |
Number of Drivers |
2 |
Number of Transceivers |
1 |
Receive Delay-Max |
3000 ns |
Simplex/Duplex |
Full Duplex |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
EXTERNAL CHARGE PUMP |
Subcategory |
Line Driver or Receivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
MAX220EWE+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.295, 7.50mm Width) package.The package of this receiver is Tube.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.5V~5.5V for power supply.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.MAX220 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 16 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In most cases, the receiver will be specified with a 2-bit resolution.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers in total implemented by this IC.The integrator circuit comes with embedded 2 drivers.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP function that improves the overall stability and accuracy of the signal management.This IC has 8 serial I/Os that are standard for this type of IC.
MAX220EWE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX220EWE+ Applications
There are a lot of Maxim Integrated MAX220EWE+ Drivers/Receivers/Transceivers applications.
- Datacom networking applications
- Wireless communication
- Telecom applications
- Switching system
- LAN, SAN, WAN (local, storage, work area networks)
- Clock radio
- High-speed computer links
- Wireless smart house
- AV receiver
- Cable network front end