MAX221ECUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 4 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Output Low Current-Max | 0.0032A |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX221ECUE+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-TSSOP (0.173, 4.40mm Width) package.In this package, the receiver is mounted in the Tube format.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 4.5V~5.5V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.This transceiver is packaged with 16 market standard pinoutsSince the part number MAX221 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.Wide receiver with enhanced power dissipation control, 16-pin.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.An IC with 4 standard serial inputs and outputs, this is a great IC to use.
MAX221ECUE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX221ECUE+ Applications
There are a lot of Maxim Integrated MAX221ECUE+ Drivers/Receivers/Transceivers applications.
- WDM transmission
- Precision geodetic measurement
- interconnection between computers
- Wireless modems
- Fiber-to-the-desktop
- Pocket PC
- Wireless interactive experience
- Thermal management
- Metro access rings
- Servers
