MAX222CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Weight | 1.26609g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX222 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 3.5 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 200kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 3500 ns |
| High Level Input Current-Max | 0.00004A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX222CN Overview
An excellent driver IC for common LEDs thanks to its enhanced 18-DIP (0.300, 7.62mm) package.The Tube package contains this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, you can install this wide receiver.This differential driver uses 4.5V~5.5V for power supply.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 18 market standard pinouts is provided with this integrated circuit.The base part number MAX222 identifies the product type, temperature, package, etc., so you can search for more variants by using it.It is a 18-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Through Hole mounting technologies.Typically, the resolution of this receiver is specified to be 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.In total, there are 1 transceivers implemented by this module isolated transceiver.The integrator circuit comes with embedded 2 drivers.This is an IC with 8 standard serial I/O capabilities.
MAX222CN Features
Tube package
18 pin count
18 pins
5V power supply
MAX222CN Applications
There are a lot of Texas Instruments MAX222CN Drivers/Receivers/Transceivers applications.
- Broadcast application
- Remote controls
- Car radio
- Remote controls
- Bridges
- Wireless network systems
- Desktop PC
- Bar, KTV wireless entertainment
- Optical sub-assembly (OSA)
- Structural bonding
