MAX222CWN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX222 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 4mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Transmit Delay-Max | 3500 ns |
| Number of Receivers | 2 |
| High Level Input Current-Max | 0.00004A |
| Height | 2.35mm |
| Length | 11.75mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX222CWN+ Overview
LED drivers with the enhanced 18-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.The package of this receiver is Tube.As a Transceiver can transceiver, this part has enabled many applications to be served.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A differential driver like this uses 4.5V~5.5V of power.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 18 terminations integrated.As a standard package, this transceiver comes with a 18-pin layout that follows the market standard.Since the base part number MAX222 describes the product type, temperature, package, etc., you might get more options by searching with it.The driver IC has improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.As a result of the ic receiver, the resolution of the driver was increased to 2 bits.An input voltage supply of 5V is required to operate the transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.Transceivers implemented by this IC total 1 in total.A 2 receiver is included.Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP function provides improved signal management accuracy and stability.With this integrating circuit you can drive LEDs of a voltage of up to 10mA. It can be used to drive large displays.
MAX222CWN+ Features
Tube package
18 pin count
18 pins
5V power supply
MAX222CWN+ Applications
There are a lot of Maxim Integrated MAX222CWN+ Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Cell phones
- Thermal management
- Bridges
- Notebook
- VoIP phones
- Servers
- Automation systems
- Tuner
- Wireless projection application for conferences
