MAX222EWN+

18 Terminations18 Pin MAX222 Receivers2 Bits 2/2 Drivers/Receivers2 Functions

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX222EWN+
Package: 18-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 139
Description: 18 Terminations18 Pin MAX222 Receivers2 Bits 2/2 Drivers/Receivers2 Functions(Kg)

Details

Tags

Parameters
Package / Case	18-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	18
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	EXTERNAL CHARGE PUMP
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX222
Pin Count	18
Qualification Status	Not Qualified
Power Supplies	5V
Supply Current-Max	10mA
Data Rate	250kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	2/2
Driver Number of Bits	2
Receiver Number of Bits	2
Duplex	Full
Receiver Hysteresis	500mV
Interface Standard	EIA-232-E; TIA-232-E; V.28; V.24
Receive Delay-Max	1000 ns
Transmit Delay-Max	3500 ns
Output Low Current-Max	0.0032A
Out Swing-Min	10 V
High Level Input Current-Max	0.00004A
Height Seated (Max)	2.65mm
Length	11.55mm
Width	7.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mounting Type	Surface Mount

MAX222EWN+ Overview

This driver chip is excellent for driving common LEDs due to its enhanced 18-SOIC (0.295, 7.50mm Width) package.Tube package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.5V is the supply voltage range that this line driver ic can efficiently operate with.Wide receiver has 18 terminations built in for driving or receiving signals from data.This transceiver is packaged with 18 market standard pinoutsSince the base part number MAX222 describes the product type, temperature, package, etc., you might get more options by searching with it.A 18-pin driver IC with enhanced power dissipation control is featured here.Using this ic receiver, you were able to achieve a resolution of 2 bits.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP function that improves the overall stability and accuracy of the signal management.To power the ic receiver, sufficient current but not more than 10mA should be supplied to its VCC pin.