MAX232ACSE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Operating Supply Current | 4μA |
| Power Dissipation | 842mW |
| Supply Current-Max | 10mA |
| Data Rate | 200kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 1000 ns |
| Transmit Delay-Max | 3500 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.00004A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX232ACSE Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.Driver ICs with a supply voltage range of 5V can operate efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.There are 16 pinouts available on this transceiver which are market standard.Since the base part number MAX232 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.In the case of this receiver, a resolution of 2 bits is typically specified.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.A EXTERNAL CHARGE PUMP function is also included in this optical transceiver module, which improves stability and accuracy of signal management.The VCC pin of the ic receiver should receive enough but not more than 10mA of input current.With this integrating circuit you can drive LEDs of a voltage of up to 4μA. It can be used to drive large displays.
MAX232ACSE Features
Tube package
16 pin count
5V power supply
MAX232ACSE Applications
There are a lot of Maxim Integrated MAX232ACSE Drivers/Receivers/Transceivers applications.
- Shortwave receiver
- Transmission stations
- Wireless access points
- Metro access rings
- Cable network front end
- interconnection between switches
- Car radio
- Precision engineering measurement
- Automation systems
- Radio transmission
