Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Transceiver |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
EXTERNAL CHARGE PUMP |
HTS Code |
8542.39.00.01 |
Subcategory |
Line Driver or Receivers |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX232 |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Qualification Status |
Not Qualified |
Power Supplies |
5V |
Operating Supply Current |
4μA |
Power Dissipation |
842mW |
Supply Current-Max |
10mA |
Data Rate |
200kbps |
Output Characteristics |
TOTEM-POLE |
Differential Output |
NO |
Output Polarity |
INVERTED |
Protocol |
RS232 |
Input Characteristics |
SCHMITT TRIGGER |
Number of Drivers/Receivers |
2/2 |
Driver Number of Bits |
2 |
Receiver Number of Bits |
2 |
Duplex |
Full |
Receiver Hysteresis |
500mV |
Interface Standard |
EIA-232-E; TIA-232-E; V.28; V.24 |
Receive Delay-Max |
1000 ns |
Transmit Delay-Max |
3500 ns |
Output Low Current-Max |
0.0032A |
Out Swing-Min |
10 V |
High Level Input Current-Max |
0.00004A |
Height Seated (Max) |
2.65mm |
Length |
10.3mm |
Width |
7.5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX232ACWE Overview
The enhanced 16-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.The package of this receiver is Tube.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyIt is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 16 terminations for driving and receiving data signals.This transceiver is packaged with 16 market standard pinoutsSince the part number MAX232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It provided a 2-bit resolution capability with this ic receiver.There are typically 2 bits of resolution specified in the specifications of this receiver.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.A EXTERNAL CHARGE PUMP function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.The VCC pin of the ic receiver should receive enough but not more than 10mA of input current.An input voltage of 4μA is recommended for this integrating circuit to be able to drive LEDs.
MAX232ACWE Features
Tube package
16 pin count
5V power supply
MAX232ACWE Applications
There are a lot of Maxim Integrated MAX232ACWE Drivers/Receivers/Transceivers applications.
- Ship
- Home theater wiring-free
- Interconnection between switches and computers
- Long-distance fiber optic network applications
- LAN, SAN, WAN (local, storage, work area networks)
- Fiber distributed data interface (FDDI)
- Fiber optic cable connection network
- Datacom networking applications
- Satellite communications networks
- Point-to-point networking