MAX232AESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Interface | RS-232 |
| Supply Current-Max | 10mA |
| Data Rate | 200kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 1000 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 3500 ns |
| Number of Receivers | 2 |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.00004A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232AESE+ Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply for this differential driver is 4.5V~5.5V.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.16 terminations are integrated into this wide receiver for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.You can search with MAX232 to get more variants of this part, since it identifies the product type, temperature, package, etc.16-pin driver IC with improved power dissipation control.Using this ic receiver, you were able to achieve a resolution of 2 bits.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.This rf transceiver module can have?up to 2 eligible receivers on the field at once.?Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP function provides improved signal management accuracy and stability.Input current should not exceed 10mA at the VCC pin of the ic receiver.
MAX232AESE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX232AESE+ Applications
There are a lot of Maxim Integrated MAX232AESE+ Drivers/Receivers/Transceivers applications.
- Home theater wiring-free
- Wireless showroom
- Optical sub-assembly (OSA)
- Wireless access points
- Routers
- Wireless network systems
- Carrier phase observations
- Long-distance fiber optic network applications
- Car radio
- Desktop PC
