MAX232CSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 5mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.75mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232CSE+T Overview
Driver ICs with enhanced 16-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.Tape & Reel (TR) package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.It takes 4.5V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.16 terminations are integrated into this wide receiver for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.With the part number MAX232 identifying the product type, temperature, package, etc., you can search with it to see more variants.Wide receiver with enhanced power dissipation control, 16-pin.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In most cases, the receiver will be specified with a 2-bit resolution.There is a voltage supply of 5V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers in total that this module isolated transceiver implements.The integrator circuit is embedded with 2 drivers.This optical transceiver module also features the EXTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.An IC with 8 standard serial I/Os is provided in this package.
MAX232CSE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX232CSE+T Applications
There are a lot of Maxim Integrated MAX232CSE+T Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Wireless interactive experience
- Satellite communications networks
- Satellite communication
- Wireless security systems
- Sensor reporting
- Military satellite communications
- Wireless showroom
- Laser diode bonding
- VoIP phones
