MAX232DWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 10mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232DWE4 Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.295, 7.50mm Width) package.In the Tube package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver requires a 4.5V~5.5V power supply.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.This transceiver is packaged with 16 market standard pinoutsSince the base part number MAX232 describes the product type, temperature, package, etc., you might get more options by searching with it.16-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Driver ICs such as this one are designed to operate from 5V power sources.Transceivers implemented by this IC total 1 in total.The part is embedded with 2 drivers, so it can be used with 2 devices.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP function that improves the overall stability and accuracy of the signal management.
MAX232DWE4 Features
Tube package
16 pin count
16 pins
5V power supply
MAX232DWE4 Applications
There are a lot of Texas Instruments MAX232DWE4 Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- AV receiver
- TV signal transmission
- Cell phones
- IP cameras
- Wireless showroom
- Wired telephone
- Wireless communication
- VoIP phones
- Precision geodetic measurement
