MAX232ECSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232ECSE+T Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) package is used for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.5V~5.5V.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.With the part number MAX232 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control is provided by this 16-pin driver IC.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.There are typically 2 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.ICs implement a total of 1 transceivers.2 drivers are embedded on the integrator circuit.The EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.An IC with 8 standard serial I/Os is provided in this package.
MAX232ECSE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX232ECSE+T Applications
There are a lot of Maxim Integrated MAX232ECSE+T Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Aircraft navigation
- AV receiver
- Portable radio
- Satellite communication
- Shortwave receiver
- Wireless showroom
- Notebook
- Point-to-point networking
- Telecom applications
