MAX232ECWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232ECWE+ Overview
Driver ICs with enhanced 16-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package houses this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.An operating voltage range of 5V is suitable for this line driver ic.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number MAX232 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.There are typically 2 bits of resolution specified in the specifications of this receiver.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed so that it can be operated from a 5V power supply with this driver IC.It implements 1 transceivers in total.The part is embedded with 2 drivers, so it can be used with 2 devices.In addition, the optical transceiver module's EXTERNAL CHARGE PUMP function improves signal management accuracy and stability overall.An IC with 8 standard serial I/Os is provided in this package.
MAX232ECWE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX232ECWE+ Applications
There are a lot of Maxim Integrated MAX232ECWE+ Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- Fast Ethernet
- Remote controls
- Portable radio
- Single fiber bidirectional application
- Wireless 3D game
- Routers
- Desktop PC
- Vehicle
- Wireless communication
