MAX232EEWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 10mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 |
| Receive Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.0002A |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232EEWE+T Overview
This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The Tape & Reel (TR) package houses this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 4.5V~5.5V power supply.As many as 2/2 receivers/drivers are eligible for use on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.It is packaged with 16 pinouts that are market standard for this particular transceiver.As the base part number MAX232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This ic receiver provided a 2-bit resolution capability. There is usually a 2-bit resolution specified for this receiver when it is used.Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP function that improves the overall stability and accuracy of the signal management.The optical transceiver module's VCC pin should receive enough input current, but not more than 10mA.
MAX232EEWE+T Features
Tape & Reel (TR) package
16 pin count
5V power supply
MAX232EEWE+T Applications
There are a lot of Maxim Integrated MAX232EEWE+T Drivers/Receivers/Transceivers applications.
- Wireless interactive experience
- Wireless teaching
- Wireless communication
- Wireless smart house
- Cable network front end
- Desktop radio
- Interconnection between switches and computers
- Single to Multimode Fiber Conversion
- Televisions
- Clock radio
