MAX232EID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Output Voltage | 300mV |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Output Current | 10mA |
| Propagation Delay | 500 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232EID Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An operating voltage range of 5V is suitable for this line driver ic.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 16 market standard pinoutsSince the part number MAX232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.16-pin driver IC with improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.This receiver is typically specified with a resolution of 2 bits. This transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers implemented in this module isolated transceiver.On the integrator circuit, there are 2 drivers embedded.A 8-serial I/O IC is available which provides a standard interface for serial communication.The device is capable of delivering voltage at the 300mV axis.In this bluetooth transceiver, the output current is rated at 10mA.
MAX232EID Features
Tube package
16 pin count
16 pins
5V power supply
MAX232EID Applications
There are a lot of Texas Instruments MAX232EID Drivers/Receivers/Transceivers applications.
- SONET/SDH Network
- IP cameras
- Switching system
- Metro access rings
- Ethernet circuitry
- Low power, low voltage systems
- Wireless transmission
- Sensor reporting
- Portable radio
- Switches
