MAX232EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Operating Supply Current | 4μA |
| Power Dissipation | 842mW |
| Supply Current-Max | 10mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX232EPE Overview
LED drivers with the enhanced 16-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The Tube package contains this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.This line driver ic can operate efficiently with a supply voltage range of 5V.Wide receiver has 16 terminations built in for driving or receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.This part number MAX232 can be used to search for more variants based on the product type, temperature, package, etc.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.This receiver is typically specified with a resolution of 2 bits. Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 10mA of input current.With an input voltage of 4μA, this integrating circuit has the ability to drive LEDs with an output voltage of 4μA.
MAX232EPE Features
Tube package
16 pin count
5V power supply
MAX232EPE Applications
There are a lot of Maxim Integrated MAX232EPE Drivers/Receivers/Transceivers applications.
- Telecom applications
- Military satellite communications
- Ship
- SONET/SDH Network
- AV receiver
- Copper connection network
- Indoor ad hoc meeting
- Bar, KTV wireless entertainment
- interconnection between computers
- Satellite communication
