MAX232ESE+
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 10mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.0002A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
MAX232ESE+ Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyThis electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 16 terminations built in for driving or receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.MAX232 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.The driver IC has improved power dissipation control.This ic receiver provided a 2-bit resolution capability. This receiver is typically specified with a resolution of 2 bits. An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.In addition, the optical transceiver module's EXTERNAL CHARGE PUMP function improves signal management accuracy and stability overall.Input current should not exceed 10mA at the VCC pin of the ic receiver.
MAX232ESE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX232ESE+ Applications
There are a lot of Maxim Integrated MAX232ESE+ Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Routers
- IP cameras
- Notebook
- Indoor ad hoc meeting
- Wireless network systems
- AV receiver
- Remote controls
- Ethernet circuitry
- Low power, low voltage systems
