MAX232EWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232EWE+T Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.295, 7.50mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.The base part number MAX232 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 16-pin driver IC with enhanced power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.On the integrator circuit, there are 2 drivers embedded.Additionally, this optical transceiver module features the EXTERNAL CHARGE PUMP function, which improves the stability and accuracy of signal management in general.This is an IC that comes with a total of 8 standard serial I/O ports.
MAX232EWE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX232EWE+T Applications
There are a lot of Maxim Integrated MAX232EWE+T Drivers/Receivers/Transceivers applications.
- Laser diode bonding
- Desktop PC
- Precision engineering measurement
- Indoor ad hoc meeting
- Broadcast application
- Carrier phase observations
- Precision geodetic measurement
- Bridges
- WDM transmission
- 1x/2x Fiber Channel
