MAX233ACPP+G36
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX233 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 4.45mm |
| Length | 26.54mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX233ACPP+G36 Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, you can install this wide receiver.A differential driver like this uses 4.75V~5.25V of power.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 5V can operate efficiently.In order to drive and receive signals from data, this wide receiver has 20 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.For more variants of this part, try searching with the base part number MAX233, which indicates the product type, temperature, package, etc.It is a 20-pin driver IC with enhanced power dissipation controls.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.Typically, the resolution of this receiver is specified to be 2 bits.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There is a subcategory named Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.The integrator circuit comes with embedded 2 drivers.ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.In this instance, there are a total of 8 serial input/output ports on the IC.
MAX233ACPP+G36 Features
Tube package
20 pin count
20 pins
5V power supply
MAX233ACPP+G36 Applications
There are a lot of Maxim Integrated MAX233ACPP+G36 Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Servers
- Copper connection network
- Thermal management
- Bridges
- Remote controls
- Satellite communications networks
- Ethernet circuitry
- Wireless access points
- Mainframes, workstations or storage devices
