MAX233CPP+G36
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | INTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX233 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 10mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Height | 4.45mm |
| Length | 26.54mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX233CPP+G36 Overview
This LED driver IC features an enhanced 20-DIP (0.300, 7.62mm) package for driving common LEDs.The receiver is packaged in a Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver consumes 4.75V~5.25V for its power supplyDuring operation, this electronic part may have up to 2/2 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.Transceiver comes with 20 standard pinouts that meet the market's requirements.The base part number MAX233 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control is provided by this 20-pin driver IC.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.There are typically 2 bits of resolution specified in the specifications of this receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The integrator circuit has embedded 2 drivers.In addition, the optical transceiver module's INTERNAL CHARGE PUMP function improves signal management accuracy and stability overall.With this integrating circuit you can drive LEDs of a voltage of up to 10mA. It can be used to drive large displays.
MAX233CPP+G36 Features
Tube package
20 pin count
20 pins
5V power supply
MAX233CPP+G36 Applications
There are a lot of Maxim Integrated MAX233CPP+G36 Drivers/Receivers/Transceivers applications.
- Shortwave receiver
- Bar, KTV wireless entertainment
- Long-distance fiber optic network applications
- Wireless interactive experience
- Wireless access points
- Wireless security systems
- Wireless teaching
- Cordless telephone
- Transmission stations
- Satellite radio receiver
