MAX236CNG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX236 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 14 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 3 |
| Height | 4.45mm |
| Length | 32.13mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX236CNG+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 24-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Through Hole-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.As many as 4/3 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.There are 24 terminations in this wide receiver so that signals can be driven from the data and received.In this package, you will find 24 market-standard pinouts for this transceiver.As the base part number MAX236 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 24-pin driver IC with enhanced power dissipation control is featured here.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Through Hole mounting technologies.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers in total that this module isolated transceiver implements.There are 3 receivers inside.The integrator circuit comes with embedded 4 drivers.ICs with EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS functions also improve the overall stability and accuracy of signal management.A 14-serial I/O IC is available which provides a standard interface for serial communication.
MAX236CNG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX236CNG+ Applications
There are a lot of Maxim Integrated MAX236CNG+ Drivers/Receivers/Transceivers applications.
- IPTV front end
- Wireless access points
- Remote controls
- Bridges
- Car radio
- Wireless teaching
- Optical sub-assembly (OSA)
- Fiber optic cable connection network
- Single fiber bidirectional application
- High-speed computer links
