MAX236CWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX236 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 14 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 3 |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX236CWG+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 24-SOIC (0.295, 7.50mm Width) package.The Tube package contains this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.At any one time, this electronic part can have up to 4/3 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In this wide receiver, 24 terminations are integrated for driving and receiving signals from data.A package consisting of 24 market standard pinouts is provided with this integrated circuit.This part number MAX236 can be used to search for more variants based on the product type, temperature, package, etc.This is a 24-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.In total, there are 1 transceivers implemented by this module isolated transceiver.In addition to that, it contains 3 receivers as well.The integrator circuit is embedded with 4 drivers.Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function provides improved signal management accuracy and stability.A 14-serial I/O IC is available which provides a standard interface for serial communication.
MAX236CWG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX236CWG+ Applications
There are a lot of Maxim Integrated MAX236CWG+ Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Vehicle
- Sensor reporting
- Mainframes, workstations or storage devices
- Routers
- Laser diode bonding
- 1x/2x Fiber Channel
- Satellite ground stations
- Wireless transmission
- Single to Multimode Fiber Conversion
