MAX236EWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX236 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/3 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX236EWG+ Overview
Driver ICs with enhanced 24-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 4.5V~5.5V.During operation, this electronic part may have up to 4/3 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.With a supply voltage range of 5V, this line driver ic operates efficiently.For driving and receiving signals from data, this wide receiver has 24 terminations integrated.It is packaged with 24 pinouts that are market standard for this particular transceiver.With the part number MAX236 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.This ic receiver provided a 4-bit resolution capability. As a general rule, this receiver has a resolution of 3 bits that is usually specified.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.This optical transceiver module also features the EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function, improving the overall signal management stability and accuracy.There should be enough current supplied to the VCC pin of the part, but not more than 15mA.
MAX236EWG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX236EWG+ Applications
There are a lot of Maxim Integrated MAX236EWG+ Drivers/Receivers/Transceivers applications.
- Cable network front end
- Satellite communications networks
- Carrier phase observations
- AV receiver
- Clock radio
- Precision geodetic measurement
- Laser diode bonding
- TV signal transmission
- VoIP phones
- High-speed computer links
