MAX238CWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX238 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 7mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Driver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Number of Receivers | 4 |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX238CWG+ Overview
LED drivers benefit from this IC's enhanced 24-SOIC (0.295, 7.50mm Width) package.In this package, the receiver is mounted in the Tube format.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 4.5V~5.5V power supply.It is possible to have up to 4/4 receivers/drivers in use simultaneously with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.An operating voltage range of 5V is suitable for this line driver ic.Integrated into this wide receiver are 24 terminations that are used for driving and receiving signals from data.There are 24 pinouts available on this transceiver which are market standard.MAX238 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 24-pin driver IC with enhanced power dissipation control is featured here.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.An important feature of this ic receiver was its 4-bit resolution capability.There is a voltage supply of 5V required in order for this transceiver module to be operated.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.ICs implement a total of 1 transceivers.The box contains 4 receivers.The EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 15mA.
MAX238CWG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX238CWG+ Applications
There are a lot of Maxim Integrated MAX238CWG+ Drivers/Receivers/Transceivers applications.
- Switches
- WDM transmission
- Desktop radio
- Fiber distributed data interface (FDDI)
- Desktop PC
- Remote controls
- Remote controls
- Clock radio
- Wireless interactive experience
- Copper connection network
