MAX239CWG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 5V 7.5V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX239 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Power Supplies | 512V |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Driver Number of Bits | 3 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX239CWG+T Overview
LED drivers benefit from this IC's enhanced 24-SOIC (0.295, 7.50mm Width) package.The receiver is packaged in a Tape & Reel (TR) package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 5V 7.5V~13.2V of power.At any one time, this electronic part can have up to 3/5 eligible receivers/drivers.IC receiver is designed for applications with a temperature of 0°C~70°C.Wide receiver can operate within the range of 5V supply voltages efficiently.Wide receiver has 24 terminations built in for driving or receiving signals from data.Transceiver comes with 24 standard pinouts that meet the market's requirements.For more variants of this part, try searching with the base part number MAX239, which indicates the product type, temperature, package, etc.In this ic receiver, the resolution was able to be set to a maximum of 3 bits.There is typically a resolution of 5 bits specified with this receiver.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.The driver IC in this product is designed so that it can be powered by 512V.ICs with EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS functions also improve the overall stability and accuracy of signal management.
MAX239CWG+T Features
Tape & Reel (TR) package
24 pin count
512V power supply
MAX239CWG+T Applications
There are a lot of Maxim Integrated MAX239CWG+T Drivers/Receivers/Transceivers applications.
- Thermal management
- Fiber-to-the-desktop
- Clock radio
- AV receiver
- Wired telephone
- Optical sub-assembly (OSA)
- Portable radio
- Tuner
- Wireless access points
- Cell phones
