MAX241CWI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX241 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 18 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 5 |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX241CWI+ Overview
Due to the enhanced 28-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used to mount this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 4/5 eligible receivers/drivers.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.28 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 28 pinouts that are market standard for this particular transceiver.MAX241 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 28-pin driver IC.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.Transceivers implemented by this IC total 1 in total.There are also 5 receivers in it as well.The integrator circuit has embedded 4 drivers.A EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function is also included in this optical transceiver module, which improves stability and accuracy of signal management.There are 18 serial I/Os on board this IC, and it has a standard VGA interface.
MAX241CWI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX241CWI+ Applications
There are a lot of Maxim Integrated MAX241CWI+ Drivers/Receivers/Transceivers applications.
- interconnection between computers
- Wireless projection application for conferences
- Remote controls
- Wireless modems
- Satellite communications networks
- Low power, low voltage systems
- Desktop PC
- Indoor ad hoc meeting
- Fiber distributed data interface (FDDI)
- Satellite radio receiver
