MAX241ECWI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX241 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 18 |
| Nominal Supply Current | 15mA |
| Propagation Delay | 10 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Number of Receivers | 5 |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MAX241ECWI Overview
With the enhanced 28-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.The field can have up to 4/5 eligible receivers/drivers at once when using this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.An operating voltage range of 5V is suitable for this line driver ic.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.Transceiver comes with 28 standard pinouts that meet the market's requirements.As the base part number MAX241 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.28-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Driver ICs such as this one are designed to operate from 5V power sources.There are 1 transceivers in total that this module isolated transceiver implements.Additionally, there are 5 receivers included in the package.The integrator circuit comes with embedded 4 drivers.In addition, the optical transceiver module's TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function improves signal management accuracy and stability overall.There are 18 standard serial I/O ports on this IC, which makes it a very versatile one.
MAX241ECWI Features
Tube package
28 pin count
28 pins
5V power supply
MAX241ECWI Applications
There are a lot of Maxim Integrated MAX241ECWI Drivers/Receivers/Transceivers applications.
- Routers
- Broadcast application
- Wireless multimedia center in smart home
- Fast Ethernet
- Radio transmission
- Point-to-point networking
- Changeing the frequency from IF to RF
- Home theater wiring-free
- Notebook
- Cordless telephone
