MAX241EWI+
| Parameters | |
|---|---|
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX241 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
MAX241EWI+ Overview
Due to the enhanced 28-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used to mount this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.A differential driver like this uses 4.5V~5.5V of power.The field can have up to 4/5 eligible receivers/drivers at once when using this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.Wide receiver has 28 terminations built in for driving or receiving signals from data.Transceiver comes with 28 standard pinouts that meet the market's requirements.Since the part number MAX241 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 28 pins.This ic receiver provided a 4-bit resolution capability. There are typically 5 bits of resolution specified in the specifications of this receiver.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.This optical transceiver module also features the EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function, improving the overall signal management stability and accuracy.Enough but no exceeding 15mA of input current should be supplied to the VCC pin of the ic receiver.
MAX241EWI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX241EWI+ Applications
There are a lot of Maxim Integrated MAX241EWI+ Drivers/Receivers/Transceivers applications.
- Wireless teaching
- Long-distance fiber optic network applications
- Fiber optic cable connection network
- High-speed computer links
- WDM transmission
- Remote controls
- interconnection between switches
- Pocket PC
- Cable network front end
- Wireless modems
