MAX242EWN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX242 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 200kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Transmit Delay-Max | 3500 ns |
| High Level Input Current-Max | 0.00004A |
| Height | 2.35mm |
| Length | 11.75mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX242EWN+ Overview
LED drivers with the enhanced 18-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.In order to drive and receive signals from data, this wide receiver has 18 terminations integrated.A package consisting of 18 market standard pinouts is provided with this integrated circuit.As the base part number MAX242 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 18-pin driver IC with enhanced power dissipation control is featured here.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There are typically 2 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.There are 1 transceivers in total that this module isolated transceiver implements.On the integrator circuit are embedded 2 drivers.This is an IC with 8 standard serial I/O capabilities.
MAX242EWN+ Features
Tube package
18 pin count
18 pins
5V power supply
MAX242EWN+ Applications
There are a lot of Maxim Integrated MAX242EWN+ Drivers/Receivers/Transceivers applications.
- Ship
- Switching system
- Vehicle
- Indoor ad hoc meeting
- Remote controls
- Optical sub-assembly (OSA)
- Fiber-to-the-desktop
- Shortwave receiver
- Laser diode bonding
- Low power, low voltage systems
