MAX243CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX243 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 200kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Transmit Delay-Max | 3500 ns |
| High Level Input Current-Max | 0.00004A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX243CPE+ Overview
With the enhanced 16-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCBs or development boards with Through Hole-types can accommodate this wide receiver.This differential driver uses 4.5V~5.5V for power supply.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 5V can operate efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.Since the base part number MAX243 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation driver IC with 16 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Through Hole mounting technologies.In the case of this receiver, a resolution of 2 bits is typically specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.There are 1 transceivers implemented in this module isolated transceiver.The integrator circuit has embedded 2 drivers.A EXTERNAL CHARGE PUMP function is also included in this optical transceiver module, which improves stability and accuracy of signal management.It is an integrated circuit with 8 serial I/Os that are in line with industry standards.
MAX243CPE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX243CPE+ Applications
There are a lot of Maxim Integrated MAX243CPE+ Drivers/Receivers/Transceivers applications.
- Sensor reporting
- Datacom networking applications
- Laser diode bonding
- Ethernet circuitry
- Mainframes, workstations or storage devices
- Fiber optic cable connection network
- Interconnection between switches and computers
- Thermal management
- High-speed computer links
- 1x/2x Fiber Channel
