MAX250CSD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 259.19969mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX250 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 100μA |
| Data Rate | 116 kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 600mV |
| Number of Transceivers | 1 |
| Number of Receivers | 2 |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX250CSD+ Overview
Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.This wide receiver can be placed on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~5.5V.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.5V is the supply voltage range that this line driver ic can efficiently operate with.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.Transceiver comes with 14 standard pinouts that meet the market's requirements.MAX250 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 14 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In this ic receiver, the resolution was able to be set to a maximum of 2 bits.There is a 5V input voltage supply that can be used to operate this transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The module isolated transceivers are 2 receivers.Using the input voltage of 500μA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
MAX250CSD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX250CSD+ Applications
There are a lot of Maxim Integrated MAX250CSD+ Drivers/Receivers/Transceivers applications.
- Bridges
- Wireless access points
- Mainframes, workstations or storage devices
- Remote controls
- Long-distance fiber optic network applications
- Fiber optic cable connection network
- Optical sub-assembly (OSA)
- Data center
- Gigabit Ethernet
- Satellite ground stations
