MAX251CPD+
| Parameters | |
|---|---|
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 600mV |
| Interface Standard | EIA-232-C; V.28 |
| Negative Supply Voltage-Nom | -10V |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 5.72mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX251 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | +-10V |
| Supply Current-Max | 2.5mA |
| Data Rate | 116 kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
MAX251CPD+ Overview
LED drivers with the enhanced 14-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a supply voltage range of 10V, this line driver ic operates efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.It is packaged with 14 pinouts that are market standard for this particular transceiver.With the part number MAX251 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control driver IC featuring 14 pins.There is a capability of 2-bit resolution with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs such as this one are designed to operate from +-10V power sources.Additionally, the optical transceiver module's ISOLATED DATA INTERFACE-PAIRED WITH MAX250; RS-232 TO OPTO INTERFACE; TRISTATABLE RECEIVERS function provides improved signal management accuracy and stability.The VCC pin of the ic receiver should receive enough but not more than 2.5mA of input current.You should keep the temperature of the line driver ic above -10V during operation.
MAX251CPD+ Features
Tube package
14 pin count
14 pins
+-10V power supply
MAX251CPD+ Applications
There are a lot of Maxim Integrated MAX251CPD+ Drivers/Receivers/Transceivers applications.
- Indoor ad hoc meeting
- AV receiver
- Satellite communication
- Sensor reporting
- interconnection between computers
- Gigabit Ethernet
- Satellite communications networks
- Notebook
- Ethernet circuitry
- Telecom applications
