MAX305CPE

150ns, 100ns DPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX305 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX305CPE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 532
Description: 150ns, 100ns DPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX305 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX305
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	5+-15V
Number of Channels	2
Max Supply Voltage	30V
Min Supply Voltage	10V
Nominal Supply Current	10nA
Max Supply Current	10nA
Throw Configuration	DPST
Turn On Delay Time	150 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	DPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Length	19.175mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX305CPE Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using DPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with MAX305. It has an internal resistance of 35Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 30V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 10V as the lowest voltage for the electrical part. Putting voltage greater than 10nA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 20VThe voltage should be at least 4.5V if you are using dual power supplies. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating voltages of 20V are compatible with the electrical part. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.