MAX305EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 35Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX305 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 5+-15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Normal Position | NO |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX305EPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. The total number of terminations is 16. As a result of its 2 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. Multiplexers built on a DPST - NO switching circuit are built. The multiplexer consists of 2 circuits. Search with MAX305 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 35Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. In order for the electronic part to function properly, the lowest voltage should be 10V. Despite this switch's dual supply capability, its voltage should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Additional features include: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.
MAX305EPE Features
2 Channels
Switch Circuit: DPST - NO
Additional Features: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
MAX305EPE Applications
There are a lot of Maxim Integrated MAX305EPE Analog Switches & Multiplexers ICs applications.
- Communications systems
- FTTH
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- PDAs
- Residential Gateways, Home Gateway/Router
- ISDN NT1/TA
- Digital cross connects (DSX-1)
- Communication systems
- Remote wireless modules
- Imaging
