MAX305ESE

150ns, 100ns DPST - NO 35Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX305 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX305ESE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 627
Description: 150ns, 100ns DPST - NO 35Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX305 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX305
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	5+-15V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	30V
Min Supply Voltage	10V
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	DPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	150ns
Switch-off Time-Max	100ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX305ESE Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 16 terminations. High-quality output is provided by the electronic component's 2 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on DPST - NO switching circuits, these analog multiplexers work. There are 2 circuits in this switch device. Try searching with MAX305 to find analog multiplexer variants. A 35Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 30V voltage to the switch device. It is recommended that the electrical component receives a voltage of 10V. There is no problem with using dual supply voltage, but it should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.