MAX306CWI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX306 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 16μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX306CWI+ Overview
Shipping overseas is convenient with the electronic component packed in 28-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. Total terminations are 28. A electrical component with 16 channels is capable of high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is part of the design of the 28 series that this electronic component is included. A total of 1 circuits make up this switch device. Using the MAX306 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 100Ohm. For details about the functions of 28 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 30V. Dual, Single supply type digital switch with a low cost. There should be 5V voltage fed to the electrical part below 5V. An operating current of 500μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 20V. With dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 28V operating voltages.
MAX306CWI+ Features
16 Channels
500μA Supply Current
MAX306CWI+ Applications
There are a lot of Maxim Integrated MAX306CWI+ Analog Switches & Multiplexers ICs applications.
- SDH
- PDAs
- PBXs
- Fiber to the Home
- Communication systems
- E1 Multiplexer
- Ultrasound
- Medical Instrumentation
- Relay Replacement
- Avionics
