MAX306EPI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX306 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 16μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX306EPI+ Overview
This electronic part is conveniently packaged in 28-DIP (0.600, 15.24mm), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Through Hole. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 28. A 16 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. Into the electrical component body are injected 28 pins. There are 1 circuits in this multiplexer. Using the MAX306 search parameter, you can discover variants of the switch. Analog switches have 100Ohm internal resistance. Please refer to the datasheets for 28 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 30V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 5V. The switch device would be able to operate with 500μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. For dual power supplies, a voltage of at least 4.5V should be attached.
MAX306EPI+ Features
16 Channels
500μA Supply Current
MAX306EPI+ Applications
There are a lot of Maxim Integrated MAX306EPI+ Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- DSUs
- High-Voltage
- Low-Voltage
- Signal routing between systems
- New designs requiring multiplexer functions
- Frame Relay Equipment
- Audio and video signal routing
- Medical systems
- Ultrasound
