MAX306EQI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX306 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Voltage | 15V |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 16μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX306EQI Overview
This electronic part is conveniently packaged in 28-LCC (J-Lead), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. 16:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 28. A electrical component with 16 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electronic part body is injected with 28 pins. 1 circuits are used in this analogue multiplexer. MAX306 can be used to search for analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. You can find the functions of the 28 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. An operating current of 500μA would be sufficient for this switch device. There is no problem with using dual supply voltage, but it should not exceed 20V. When using dual power supplies, you should attach at least 4.5V.
MAX306EQI Features
16 Channels
500μA Supply Current
MAX306EQI Applications
There are a lot of Maxim Integrated MAX306EQI Analog Switches & Multiplexers ICs applications.
- Switching Systems
- E1 Network Equipment
- Microwave transmission systems
- SDH/SONET multiplexers
- Sample-and-hold systems
- Battery Powered Systems
- Central office
- USB 1.1 signal switching circuits
- PBX interfaces
- Cable PC
