MAX3076EESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3076 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Supply Current-Max | 1.5mA |
| Data Rate | 16Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 100mV |
| Interface Standard | EIA-422; EIA-485; TIA-485 |
| Receive Delay-Max | 75 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.001A |
| Out Swing-Min | 1.5 V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3076EESD+T Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.The Tape & Reel (TR) package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.As many as 1/1 receivers/drivers are eligible for use on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.The base part number MAX3076 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation driver IC with 14 pins.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 3.3V-pin power supply.To power the ic receiver, sufficient current but not more than 1.5mA should be supplied to its VCC pin.
MAX3076EESD+T Features
Tape & Reel (TR) package
14 pin count
14 pins
3.3V power supply
MAX3076EESD+T Applications
There are a lot of Maxim Integrated MAX3076EESD+T Drivers/Receivers/Transceivers applications.
- Broadcast application
- Car radio
- Aircraft positioning
- WDM transmission
- LAN, SAN, WAN (local, storage, work area networks)
- Tuner
- Fiber distributed data interface (FDDI)
- Notebook
- Aircraft navigation
- transmission relay
