MAX307CPI+
| Parameters | |
|---|---|
| Resistance | 100Ohm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX307 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height | 4.45mm |
| Length | 37.34mm |
| Width | 14.61mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
MAX307CPI+ Overview
Shipping overseas is convenient due to the electrical component's packing in 28-DIP (0.600, 15.24mm). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around 0°C~70°C TA. Total terminations are 28. The electronic part provides high-quality output because it has 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component like this is included in the 28 series. The multiplexer consists of 2 circuits. Use MAX307 to search for variants of the digital switches. As far as internal resistance is concerned, it has 100Ohm. You can find the functions of the 28 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. 5V is the lowest voltage the electrical component should receive. This multiplexer would work with 500μA current. There is no problem with using dual supply voltage, but it should not exceed 20V. With dual power supplies, you should attach at least 4.5V. Operating voltages of 28V are compatible with the electrical part. This electronic part has additional features, such as: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX.
MAX307CPI+ Features
8 Channels
500μA Supply Current
Additional Features: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX
MAX307CPI+ Applications
There are a lot of Maxim Integrated MAX307CPI+ Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Communications systems
- Imaging
- Industrial
- Remote wireless modules
- Cable PC
- Battery Powered Instruments
- Cellular phones
- ATM
- High speed data transmission line cards
