MAX307EPI+

200ns, 150ns 100Ohm Analog Switches MAX307 28 Pins 500pA 15V 28-DIP (0.600, 15.24mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX307EPI+
Package: 28-DIP (0.600, 15.24mm)
Datasheet: PDF
Stock: 696
Description: 200ns, 150ns 100Ohm Analog Switches MAX307 28 Pins 500pA 15V 28-DIP (0.600, 15.24mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	28-DIP (0.600, 15.24mm)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	TIN
Additional Feature	CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX
Max Power Dissipation	727mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	MAX307
Pin Count	28
Operating Supply Voltage	28V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	30V
Min Supply Voltage	5V
Operating Supply Current	500μA
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 65pF
On-state Resistance Match-Nom	1.5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-92dB @ 100kHz
Switch-off Time-Max	150ns
Height Seated (Max)	5.08mm
Length	36.83mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX307EPI+ Overview

Shipping overseas is convenient due to the electrical component's packing in 28-DIP (0.600, 15.24mm). This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operational temperature extended around -40°C~85°C TA. In total, 28 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There are 28 pins injected into the electronic part body. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX307. This digital multiplexer has 100Ohm internal resistance. Datasheets for functions of 28 pins are available. Multiplexers should not be powered above 30V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. For this digital switch to work, 500μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply. This electrical part is compatible with 28V operating voltages. You shouldn't miss the additional features of the electrical component, such as: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX.