MAX307EQI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Surface Mount | YES |
| Packaging | Tape & Reel |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 12/+-15V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Off-state Isolation-Nom | 69 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| RoHS Status | RoHS Compliant |
MAX307EQI+T Overview
A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel. Totally, there are 28 terminations. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. A total of 28 pins are injected into the electrical part body. This switch device is a typical Multiplexer or Switches. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. This digital multiplexer requires 4.5V voltage as a minimum supply voltage. If the switch multiplexer is subjected to temperatures above 85°C, it may malfunction. A setting of over -40°C should be applied to the operating environment.
MAX307EQI+T Features
8 Channels
MAX307EQI+T Applications
There are a lot of Maxim Integrated MAX307EQI+T Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Multiplexers
- Automotive applications
- Digital access cross connects
- Video signal routing
- Imaging
- Digital Cross-Connects
- Audio and video signal routing
- Central office
- ATM
