MAX307EUI+T
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX307 |
| Pin Count | 28 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
MAX307EUI+T Overview
As the electronic part is packed in 28-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, there are 28 terminations. Due to its 8 channels, the electrical component produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. 28 pins are injected to the electronic part body. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with MAX307 if you are looking for variants. In this multiplexer, the internal resistance is 100Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. Users should never supply a voltage higher than 30V to a switch device. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 5V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. The voltage should be at least 4.5V if you are using dual power supplies. Don't forget the additional features of this electronic part, such as: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX.
MAX307EUI+T Features
8 Channels
Additional Features: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX
MAX307EUI+T Applications
There are a lot of Maxim Integrated MAX307EUI+T Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- 65 V DACs
- Data switching
- Digital access cross connects
- High reliability control systems
- MP3 players
- Transmit
- USB 1.1 signal switching circuits
- Medical Instrumentation
- Audio and video routing
