MAX307EWI
| Parameters | |
|---|---|
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX307 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 500μA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height | 2.35mm |
| Length | 18.1mm |
MAX307EWI Overview
Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 28 terminations. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of the design of the 28 series, this electronic part has been incorporated into the system. There are 2 circuits in this switch device. Try searching with MAX307 if you're looking for variants. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. Users shouldn't supply more than 30V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. For this digital switch to work, 500μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. 28V operating voltages can be used with this electrical part. This electronic part has additional features, such as: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX.
MAX307EWI Features
8 Channels
500μA Supply Current
Additional Features: CONFIGURABLE AS 16-CHANNEL SINGLE ENDED MUX
MAX307EWI Applications
There are a lot of Maxim Integrated MAX307EWI Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Private Branch Exchange (PBX)
- DSUs
- Precision test equipment
- 65 V DACs
- Digital Cross-Connects
- Fault Tolerant Systems
- Channelized and Unchannelized DS3 applications
- Low-Voltage
- Access Concentrators
