Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
1W |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX307 |
Pin Count |
28 |
Operating Supply Voltage |
28V |
Number of Channels |
8 |
Number of Circuits |
2 |
Max Supply Voltage |
30V |
Min Supply Voltage |
5V |
Operating Supply Current |
500μA |
Propagation Delay |
300 ns |
Turn On Delay Time |
600 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
5V~30V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
300 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
69 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
8pF 65pF |
On-state Resistance Match-Nom |
1.5Ohm |
Switch Time (Ton, Toff) (Max) |
200ns, 150ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
150ns |
Signal Current-Max |
0.03A |
Length |
17.9mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX307EWI+T Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 28. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component like this is included in the 28 series. It consists of 2 circuits. Try searching for MAX307 variants of the analog switch ic. A 100Ohm internal resistance characterizes this multiplexer. Users shouldn't supply more than 30V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 500μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V. The electronic component can function from 28V.
MAX307EWI+T Features
8 Channels
500μA Supply Current
MAX307EWI+T Applications
There are a lot of Maxim Integrated MAX307EWI+T Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- DSUs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Industrial and process control systems
- Relay Replacement
- Relay replacements
- Imaging
- Microprocessor Controlled Analog Systems
- Audio and video signal routing
- Multi-Line E1 Interface Cards