MAX3080ECPD+
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX3080 |
| Pin Count | 14 |
| Output Voltage | 13V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 1mA |
| Data Rate | 115Kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 100mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2600 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 2 V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 800mW |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
MAX3080ECPD+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Through Hole-type PCB or development board.In terms of power supply, this differential driver utilizes 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.Transceiver comes with 14 standard pinouts that meet the market's requirements.MAX3080 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 14-pin.This package size decreases dramatically due to optical transceiver downsizing and high-density Through Hole mounting technologies.An important feature of this ic receiver was its 1-bit resolution capability.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.There is a subcategory named Line Driver or Receivers for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.Using 13V as a voltage source, Wide receiver is able to deliver voltage.
MAX3080ECPD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX3080ECPD+ Applications
There are a lot of Maxim Integrated MAX3080ECPD+ Drivers/Receivers/Transceivers applications.
- Mainframes, workstations or storage devices
- Clock radio
- Aircraft positioning
- VoIP phones
- Bridges
- SONET/SDH Network
- Datacom networking applications
- Laser diode bonding
- Wireless multimedia center in smart home
- Notebook
